Street solar light all in one designed with LG 3535 high brightness LED SLD-SL-340S 40W
Our SLD 40W high quality solar street light street solar light all in one designed with Cree COB LED is very hot sale now.Recently,our factory is having a bulk production of integrated solar led street light.If you need our 40w all in one street solar light, please feel free to contact with us.
During charging time, if the battery of street solar light all in one reaches peak voltage, and if it continuous charging under high voltage, it will very easy to make the solar street light LED battery out of control. On the other hand, if the battery is stop charging while it is not enough capacity, the solar street light LED controller will make the voltage lower, and then turn to safety mode to protect the battery.
|Solar PV Module||Solarworld mono solar PV 60W 18V Eff:24%|
|LED Source||1.67W x 24PCS,Total:40W; life time: 50000hours|
|LED chip, LG 3535|
|Viewing angel, 70°*140°|
|Color Temperature: 3000K~3500K（warm white）/6000K-6500K(cool white)|
|Color rendering index:＞70|
|Initial Delivered Lumen Tj=25℃:6000lm|
|Normal Luminous Flux Tj=66℃:5600lm|
|Battery Capacity||LIFepo4,12.8V 24AH|
|Life time: 5-8years|
|MPPT Controller||12.8V 10A|
|Human body infrared induction model/Timing mode: The multifunctional controller, can be set up|
|Circuit Protection: Overcharge, discharge, short circuit, open load, lightning protection and other functions|
|On grid backup: optional features|
|The outer solar panels: optional features|
|Working Time(Battery full)||Timing mode to:2 Days|
|Charging Time (STC)||8 Hours|
|Installation Height||5m to 7m light pole|
|Clearance of Installation||70mm-90mm|
|Installation Diameter||15m to 25m|
Illumination Drawing of integrated solar led street light (High 4 meters)
The solar panel converts sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination
How to install 40w all in one solar street light?
*Install fuse first if present before use (remove any film under fuse)
*Tool supplied to tighten security bolts provided
*Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
*The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
*It is strongly recommended not to set high and large shelters in front of lamps to avoid the sunlight.
COB LIGHT SOURCE
Our all in one solar street light uses high quality COB light source,illumiance 140lm/watt,super bright and has a very long lifespan!
HIGH QUALITY ALLUMINUM ALLOY
We use durable aluminum,power coated for our led solar street light all in one.It is easy for installing,anti-corrosion,rust prevention.
The solar panel we used for integrated solar led street light is improted from American,very high efficency and environment friendly.Solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.
Leaving A Message
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.