Street light solar for highway SLD-SL-370 70W
Thanks for your interest on our all in one designed70W integrated solar street light , this products in hot selling and highly recommended due to its excellent performance as below :
70W SMD all in one designed street light solar suitable for any place,like main street,highway,square,parking lot,garden and so on.Special for the highway,as our all in one solar street light uses Cree chip as light source,very bright.All in one design
SLD-SL-370 70W LED all in one solar street lgiht
|Solar Panel Max Power:||18V/110W SUNPOWRsolar panel |
|Solar Panel Life Time||25 years|
|Battery Type||LiFePO4 battery(Life time 5-7years)|
|Battery Capacity||12.8V 50AH|
|LED Max Power||70W|
|Led Chip Brand||CREE from U.S.A with high brightness|
|LED Life Time||50000hours|
|Lighting Viewing Angle||120°|
|Charge Time(by sun):||6-7hours (with enough strong shine)|
|Discharge Time||more than 30 hours (step timming mode)|
|Working TEMP( ℃ )||-20~+60|
|Space between light(m):||25-30m|
|Lamps Material||aluminium alloy|
|Certificate:||ISO/CE / ROHS / IP65|
The design drawing of 70W all in one solar street light:
Weather rating is I.P. 65
Ideal operating temperature charging range is 0 deg C. to +60 deg C. (-32 deg F. to +140 deg F.).
Ideal operating temperature discharging range is -20 deg C. to +60 deg C. (-4 deg F. to +140 deg F.).
Ideal storage temperature range is 0 deg C. to +45 deg C. (-32 deg F. to +113 deg F.).
Anti-tamper (theft resistant) stainless steel hardware included for pole clamp.
Anti-tamper bolt install/release tool included.
The lamp body is make of aluminium alloy,whcih very strong and durable.
A passive infra-red motion sensor is built into the fixture on all models.
The detection range will vary depending upon a few factors including fixture mounting height, local ambient temperature etc.
All the lights can illuminate continuously for up to 24 hours in ambient mode or up to 12 hours in full brightness mode.
All SMD/LED's have a color temperature of 6000-6500k.
Zero light pollution.
The pole height of 70w are the same,7-9meters.As well as the two poles distance is 20-25meters.However,they have different lighting area.50W lamp lighting area is 27*11meters ,60w led lamp can light up 30*13meters area and 70w solar power street light can light up 34*14meters area.
As for 40w lamp,it suitable for 7-8meters pole,the distance between of two pole we would suggest 20-25meters ,and the lighting area is 27*11meters.
|Features & Advantages|
1.Patent pending integrated design,solar powered outdoor lighting
2.Easy installation. No cable needed.
3.Using LifePO4 battery to prolong product life and protect environment.
4.Light output can be adjusted automatically by a built-in infrared sensor, pedestrians closing light working bright model, after leaving from the effective sensor area, bright model will last for one minute, and then become dim model.
5.Modularity design. Easy assemble and maintenance.
6.Compact volume and light weight design saves freight cost and installation cost
7.Rust-proof, dustproof and waterproof.
8.Three years warranty.
1. Integration design, easy to carry, put solar panel, LED lamp, battery and controller all in one, don't need any cable,;
2. Installation is very convenient, use iron pole, wood pole, bamboo pole, plastic pole, wall, etc will be no problem, it will can reduce a lot of cost;
3. Using high capacity and long life of lithium iron phosphate battery,service life 5 years, can resist high temperature and low temperature, can ensure the long service life of the whole product;
4. Easy to maintain, the battery and light are the direct inserted & pluck type, can complete the main maintain by yourself in the future when the battery or light source need to be replaced, don't need a professional personage to do maintenance.
5.Integrated solar street light equipped a infrared motion sensor to intelligently control the brightness, when the passerby close to the light , it work in full power mode ,the lamp become bright , after leaving ,the lamp become half power working mode , the lamp become dim , so that to saving energy
6. Use alloy materials, waterproof, strong and durable.
7. With CE, ROHS and IP65 certificate.
The working model of 70W SMD all in one soalr street lgiht:
The solar panel converts turns sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination.
Install fuse first if present before use (remove any film under fuse)
Tool supplied to tighten security bolts provided
Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
Please turn on the switch before using.
The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
It is strongly recommended not to set high and large shelters in front of solar light to avoid the sunlight.
EXCELLENT LED CHIP
Imported LED chip,less heat dissipation,excellent performance for all in one solar led street light.
HIGH QUALITY ALLUMINUM ALLOY
Durable aluminum,power coated for led solar street light.It is easy for installing,anti-corrosion,rust prevention.
The solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.
HUMAN BODY SENSOR
Human body sensor will detect the passagers,when passagers walk away from the lamp,after 1 mins,the lamp will turn to dim mode.And when another passager walking by,it will automatically turns bright mode again.In that way,we save energy perfectly.
Every lamp is 100% test before delivery,in that way,the repair rate is rapidly reduced.
Every solar light was carefully sealed with film paper,in order to protect form dust and humidity.
Every solar lamp is packed by professional packing team.The carton box is special design for integrated solar street light.
More details of packing please check the below picture and table:
|GW.for Carton:||32.5 kg|
|20GP Container:||180 set|
|40GP Container:||360 set|
Leaving A Message