2016 hot selling all in one solar street light SLD-SL-325 25W
Here we would recommend you our integrated solar led street light, 25 Watt (3000-3200 Lumen ) LED lamps,they all use have very super bright Cree chip be light source,reach to 120-130lm/watt.We sell these models as a complete lighting system.
This compact, unique, easy to install with pole, post or wall mounted. Automatically illuminates at dusk at 33% brightness and reverts to 100% brightness when motion is detected.. It consists of a discrete solar panel installed on the top on the fixture, with a lithium battery installed inside, and a high quality SMD/LEDs on the under-side of the unit. Also on the under-side of the light is a motion sensor. When it detects activity within the light switches to full brightness mode and when the area is free of activity it will revert back to its ambient mode at approximately 1/3rd power.
This all in one light fixture may be a good choice for windy locations based on is compact design. The large version with its 1350/2400 Lumen output makes it the most powerful LED motion detector light on the market .They are suitable for streets,parks,gardens,yard and squres and so on.
2016 hot selling all in one solar street light SLD-SL-325 25Wis worthy of the name.They are sell well at home and abroad.What are you waiting for,just contact us to order.
|Solar Panel Max Power:||18V/50W (high efficiency imported silicon solar cell)||18V/60W (high efficiency imported silicon solar cell)||18V/60W (high efficiency imported silicon solar cell)|
|Solar Panel Life Time||25 years|
|Battery Type||lithium battery(Life time 5 years)|
|Battery Capacity||12.8V 21AH||12.8V 24AH||12.8V 27AH|
|LED Max Power||25W||30W||40W|
|Led Chip Brand||CREE from U.S.A with high brightness|
|LED Life Time||50000hours|
|Lighting Viewing Angle||90°×126°|
|Charge Time(by sun):||6-7hours (with enough strong shine)|
|Discharge Time||more than 20 hours (saving mode)|
|Working TEMP( ℃ )||-20~+60|
|Space between light(m):||15-20m|
|Lamps Material||aluminium alloy|
|Certificate:||ISO/CE / ROHS / IP65|
The design drawing of cree solar led street light:
The illumination data of integrated solar led street light:
Weather rating is I.P. 65
Ideal operating temperature charging range is 0 deg C. to +60 deg C. (-32 deg F. to +140 deg F.).
Ideal operating temperature discharging range is -20 deg C. to +60 deg C. (-4 deg F. to +140 deg F.).
Ideal storage temperature range is 0 deg C. to +45 deg C. (-32 deg F. to +113 deg F.).
Anti-tamper (theft resistant) stainless steel hardware included for pole clamp.
Anti-tamper bolt install/release tool included.
A passive infra-red motion sensor is built into the fixture on all models.
The detection range will vary depending upon a few factors including fixture mounting height, local ambient temperature etc.
All the lights can illuminate continuously for up to 24 hours in ambient mode or up to 12 hours in full brightness mode.
All SMD/LED's have a color temperature of 6000-6500k.
Zero light pollution.
The 25w lamp's pole would be 5-6meters,the distance of pole would be 15-20meters,and the lighting area is 16*7meters.
The 30w lamp would match with 6-7meters pole,the distance between of two pole would be 20-25meters,and the lighting area is 24*10meters around.
As for 40w lamp,it suitable for 7-8meters pole,the distance between of two pole we would suggest 20-25meters ,and the lighting area is 27*11meters.
|Features & Advantages|
1.Patent pending integrated design,solar powered outdoor lighting•Easy installation. No cable needed.
2.Using LifePO4 battery to prolong product life and protect environment.
3.Light output can be adjusted automatically by a built-in infrared sensor, pedestrians closing light working bright model, after leaving from the effective sensor area, bright model will last for one minute, and then become dim model.
4.Modularity design. Easy assemble and maintenance.
5.Compact volume and light weight design saves freight cost and installation cost
6.Rust-proof, dustproof and waterproof.
7.Three years warranty for our led solar motion light.
1. Integration design, easy to carry, put solar panel, LED lamp, battery and controller all in one, don't need any cable,;
2. Installation is very convenient, use iron pole, wood pole, bamboo pole, plastic pole, wall, etc will be no problem, it will can reduce a lot of cost;
3. Using high capacity and long life of lithium iron phosphate battery,service life 5 years, can resist high temperature and low temperature, can ensure the long service life of the whole product;
4. Easy to maintain, the battery and light are the direct inserted & pluck type, can complete the main maintain by yourself in the future when the battery or light source need to be replaced, don't need a professional personage to do maintenance.
5.Integrated solar street light equipped a infrared motion sensor to intelligently control the brightness, when the passerby close to the light , it work in full power mode ,the lamp become bright , after leaving ,the lamp become half power working mode , the lamp become dim , so that to saving energy
6. Use alloy materials, waterproof, strong and durable.
7. With CE, ROHS and IP65 certificate for our led street solar light.
The working model of 25W 30W 40W SMD all in one soalr street lgiht:
The solar panel converts turns sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination.
Install fuse first if present before use (remove any film under fuse)
Tool supplied to tighten security bolts provided
Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
Please turn on the switch before using.
The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
It is strongly recommended not to set high and large shelters in front of lamps to avoid the sunlight.
EXCELLENT LED CHIP
Imported LED chip,less heat dissipation,excellent performance
HIGH QUALITY ALLUMINUM ALLOY
Durable aluminum,power coated.It is easy for installing,anti-corrosion,rust prevention.
The solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.
HUMAN BODY SENSOR
Human body sensor will detect the passagers,when passagers walk away from the lamp,after 1 mins,the lamp will turn to dim mode.And when another passager walking by,it will automatically turns bright mode again.In that way,we save energy perfectly.
Every lamp is 100% test before delivery,in that way,the repair rate is rapidly reduced.
Every solar pv led street light was carefully sealed with film paper,in order to protect form dust and humidity.
Every lamp is packed by professional packing team.The carton box is special design for integrated solar street light.
More packing details of integrated solar led street light please check the below picture and table:
|Carton Size:||1010*410*210 mm||1225*420*210 mm|
|GW.for Carton:||17.8 kg||21.8kg||23.8 kg|
|20GP Container:||310 set||255 set|
|40GP Container:||610 set||530 set|
Thanks for your reading of our integrated solar led street light,and any question of our company or products would be warmly welcomed.
Leaving A Message
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.